UK Kennedy KC3 Throwaway Milling Cutters







HOME PAGE PRODUCTS



UK Kennedy KC3 Throwaway Milling Cutters


UK Kennedy KC3 Throwaway Milling Cutters




Kennedy 7/32" Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
Kennedy 7/32" Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification

GBP 10 (Indicative price - actual current price possibly lower)

Long series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155039X.


More....

Kennedy 3/32" Tin L/S Kc3 Throwaway Cutter UK Specification
Kennedy 3/32" Tin L/S Kc3 Throwaway Cutter UK Specification

GBP 13.61 (Indicative price - actual current price possibly lower)

Long series - inch - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155062X.


More....

Kennedy 3.5Mm Ticn Kc3 Throwaway Cutter UK Specification
Kennedy 3.5Mm Ticn Kc3 Throwaway Cutter UK Specification

GBP 12.7 (Indicative price - actual current price possibly lower)

Short series - metric - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155092X.


More....

Kennedy 3.5Mm Tin Kc3 Throwaway Cutter UK Specification
Kennedy 3.5Mm Tin Kc3 Throwaway Cutter UK Specification

GBP 8.5 (Indicative price - actual current price possibly lower)

Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155081X.


More....

Kennedy 2.5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
Kennedy 2.5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification

GBP 7.99 (Indicative price - actual current price possibly lower)

Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155029X.


More....

Kennedy 2.0Mm Ticn Kc3 Throwaway Cutter UK Specification
Kennedy 2.0Mm Ticn Kc3 Throwaway Cutter UK Specification

GBP 12.7 (Indicative price - actual current price possibly lower)

Short series - metric - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155093X.


More....

Kennedy 1.5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
Kennedy 1.5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification

GBP 7.69 (Indicative price - actual current price possibly lower)

Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155028X.


More....

Kennedy 6.0Mm Tin L/S Kc3 Throwaway Cutter UK Specification
Kennedy 6.0Mm Tin L/S Kc3 Throwaway Cutter UK Specification

GBP 9.29 (Indicative price - actual current price possibly lower)

Long series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank diameter: 1/4". Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155070X.


More....

Kennedy 5/32" Ticn Kc3 Throwaway Cutter UK Specification
Kennedy 5/32" Ticn Kc3 Throwaway Cutter UK Specification

GBP 3.36 (Indicative price - actual current price possibly lower)

Short series - inch - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155097X.


More....

Kennedy 3/32" Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
Kennedy 3/32" Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification

GBP 9.59 (Indicative price - actual current price possibly lower)

Long series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155044X.


More....

Kennedy 3/16" Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
Kennedy 3/16" Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification

GBP 16.19 (Indicative price - actual current price possibly lower)

Ball nose - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155001X.


More....

Kennedy 3Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
Kennedy 3Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification

GBP 8.29 (Indicative price - actual current price possibly lower)

Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155030X.


More....

Kennedy 4Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
Kennedy 4Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification

GBP 7.69 (Indicative price - actual current price possibly lower)

Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155027X.


More....

Kennedy 3.5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
Kennedy 3.5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification

GBP 8.98 (Indicative price - actual current price possibly lower)

Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155019X.


More....

Kennedy 5/32" Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
Kennedy 5/32" Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification

GBP 16.19 (Indicative price - actual current price possibly lower)

Ball nose - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1154997X.


More....

Kennedy 5Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification
Kennedy 5Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification

GBP 8.16 (Indicative price - actual current price possibly lower)

Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155006X.


More....

Kennedy 3.5Mm S/S Carbide Kc3 Throwaway Cutter UK Specification
Kennedy 3.5Mm S/S Carbide Kc3 Throwaway Cutter UK Specification

GBP 18.29 (Indicative price - actual current price possibly lower)

Short series - metricfor high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request). High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155105X.


More....

Kennedy 7/32" Hss-Cobalt Kc3 Throwaway Cutter UK Specification
Kennedy 7/32" Hss-Cobalt Kc3 Throwaway Cutter UK Specification

GBP 7 (Indicative price - actual current price possibly lower)

Short series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1154995X.


More....

Kennedy 6Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification
Kennedy 6Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification

GBP 8.16 (Indicative price - actual current price possibly lower)

Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155015X.


More....

Kennedy 11/64" Ticn L/S Kc3 Throwaway Cutter UK Specification
Kennedy 11/64" Ticn L/S Kc3 Throwaway Cutter UK Specification

GBP 10 (Indicative price - actual current price possibly lower)

Long series - inchticn coated to allow elevated cutting speeds and help extend tool life. Better resistance to abrasive wear than tin coated cutters. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155128X.


More....

Kennedy 5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
Kennedy 5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification

GBP 7.99 (Indicative price - actual current price possibly lower)

Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155026X.


More....

Kennedy 2.5Mm Tin L/S Kc3 Throwaway Cutter UK Specification
Kennedy 2.5Mm Tin L/S Kc3 Throwaway Cutter UK Specification

GBP 9.29 (Indicative price - actual current price possibly lower)

Long series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank diameter: 1/4". Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155075X.


More....

Kennedy 5.0Mm Ticn L/S Kc3 Throwaway Cutter UK Specification
Kennedy 5.0Mm Ticn L/S Kc3 Throwaway Cutter UK Specification

GBP 13.97 (Indicative price - actual current price possibly lower)

Long series - metric - ticn coated.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155052X.


More....

Kennedy 3/16" Hss-Cobalt Kc3 Throwaway Cutter UK Specification
Kennedy 3/16" Hss-Cobalt Kc3 Throwaway Cutter UK Specification

GBP 7 (Indicative price - actual current price possibly lower)

Short series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1154992X.


More....

Kennedy 3/16" L/S Carbide Kc3 Throwaway Cutter UK Specification
Kennedy 3/16" L/S Carbide Kc3 Throwaway Cutter UK Specification

GBP 9.59 (Indicative price - actual current price possibly lower)

Long series - inchfor high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request). High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155112X.


More....











Try Search on this site - find exactly what you need!




Item on this page: UK Kennedy KC3 Throwaway Milling Cutters



Home Page Search Products Contact Us Privacy Policy



Copyright © UKHardwareDepot.co.uk : 1997 - 2021 : All rights reserved. 140-FT